Your tree, in 25 colors.
Smart, color-changing LED lights for ceramic Christmas trees. Create a 25-color design across your 125-light string.
Your design repeats five times from the plug to the star. Built for makers who punch their own greenware or drill their own bisque, and run from your phone over Bluetooth with no account to make.
A traditional tree lights from one source inside. This one gives every bulb its own LED.
Color, bulb by bulb
You choose colors for 25 positions and the design repeats five times along the string, so several colors run on the tree at once. Custom scenes, 20 dynamic effects, 5 fixed scene modes, and music reactive lighting. Brightness is set for the whole tree, not per bulb.
Sized for greenware and bisque
Greenware is clay that has been cast and dried but not fired. Bisque is clay fired once and still unglazed. Punch greenware or drill bisque to the kit size, using the Large Standard punch that matches the bulbs, instead of guessing.
Cool bulbs, clear housings
Incandescent bulbs are still a common choice and they work, but they run hot. These LEDs run cool. The LED itself makes the color, so the housings come clear only. No colored caps to sort or replace.
No account, no login
The app pairs straight to the string over Bluetooth. There is nothing to sign up for and no email to hand over. The remote and the button on the cord work the same string.
Three things to remember while you string it.
Start with the star at the top and work down. Reaching the very top from inside can be tricky. A small dowel helps guide the first LED up to the star opening. Then feed the string down through the rest of the tree.
Plan how you feed the LEDs. They light in sequence, so the order you thread them through the holes decides how an animated effect travels across the finished tree. Worth experimenting with.
Leave slack between sections. On an extension tree, finish the main section, then carry on into the middle. Extra LEDs sitting between sections without bulbs are intentional. That slack lets you separate and move the sections later, and the spare caps go in your parts bin.
Everything arrives in one box. Nothing to solder.
These bulbs run larger than traditional twist lights, pegs, and pins.
Magic Light bulbs are larger than traditional twist lights, pegs, and pins, because the LED component needs room inside the housing. That makes hole sizing the thing to get right. If you are punching greenware, use the Large Standard punch, 12.07 mm (0.475 in), while the clay is soft. Clay shrinks in the kiln, so check the fit again at bisque. Glaze can tighten a hole further.
Drilling bisque calls for a diamond edged bit. A standard bit will not hold up against fired ceramic. Work slowly, and break the glaze back gently on a hole that ends up snug.
This is the bulb category the industry calls Twist Lights, sized Small, Medium and Large by stem diameter. Pin Lites are a different, thinner stemmed category and they are not compatible with this kit.
The current 125-light kit uses Large Standard Crystal Bulbs. Magic Light Kit is built for makers working with greenware or bisque, so plan the light openings for the bulb size you are using.
If you are using a tree mold you have not tested with the kit before, check the bulb and hole fit on your greenware before you punch the rest of the tree. That way you can make any adjustment to the hole size before repeating it across the entire piece.
Light it your way.
125 lights on one string. Use what your tree needs - from a simple glow to a fully lit look.
Need more? Add a second string for larger trees or a fuller glow.
Designed as one continuous light string — no cutting or shortening needed.
4 WAYS TO CONTROL IT.
ON-STRING CONTROL
Quick changes without your phone or remote.
24-KEY REMOTE
Colors • Brightness • Effects • Music • Timers
BLUETOOTH APP
Custom colors • Scenes • Speed • Direction • Music sensitivity
WEB BROWSER
Computer or Android • Nothing to install
Choose colors for 25 positions and mix them across the tree, like pink and green.
Turn the entire tree one solid color- from bold blue to all white.
Adjust brightness from a full glow to a soft subtle light.
125 Smart LED String, 125 Clear Large Standard Crystal Bulbs, Clear Star Topper, and the 24-Key Remote.
What comes in the kit.
Four pieces make up the Magic Light Kit. You will just need a USB power cube or power bank for the light string and one CR2025 battery for the remote.
125 Smart LED String
32.8 ft
The complete 32.8 ft Bluetooth light string.
125 Clear Bulbs
Clear only
Made to fit over each individual LED.
Clear Star Topper
Clear only
The finishing light at the top of your tree.
24-Key Remote
24 key IR
Control colors, effects, brightness and more without opening the app.
Free Hole Punch
For a limited time, each kit also includes a free hole punch to help size your tree’s light holes for the kit.
The hole punch is a bonus gift and is not part of the Magic Light Kit itself. This makes it easy for us to offer different bulb and punch sizes in the future without changing what is included in the core kit.
Power for the booth, spares for the season.
The string needs a USB power cube or a power bank, and the remote needs one CR2025. Neither ships in the box. All add-ons are sold out while we restock.
Power bank
For craft shows and tables with no outlet.
Battery box
USB out with an on off switch, for trees that travel.
Large Standard Crystal Bulbs, bag of 125
Clear faceted Large Standard Crystal Bulbs, the same ones in the kit.
CR2025 battery
3V lithium coin cell for the remote.
USB power cube
5V wall plug for the string at home.
3 to 4 business days. USA only.
All sales are final. No refunds, including on unused items.
Tell us within 48 hours of delivery and we send a replacement.